Skip to content

How to cross streets on the Northaven Trail with HAWK signals.

Short answer

Major streets on the trail are crossed at HAWK signals. Press the button and wait. Cross only when the white WALK signal appears, even if cars have already stopped.

In detail

HAWK (High-Intensity Activated CrosswalK) signals stay dark until someone presses the button. This is the sequence.

  1. Know where they are.

    HAWK signals are at Webb Chapel Rd, Marsh Ln, Royal Ln, Midway Rd, Inwood Rd and Preston Rd. The signal at Hillcrest Rd is a traditional red, yellow and green traffic signal.

  2. Press the button.

    The signal stays dark until it is activated. Once the button is pressed it flashes yellow, then turns solid yellow, then solid red for drivers.

  3. Wait for WALK.

    Cross only when the white WALK symbol appears, even if some vehicles have already stopped. Stay cautious of vehicles that may not stop.

  4. Flashing red is for drivers.

    After a pedestrian enters the crosswalk the red lights flash. Drivers must stop, and may then go only if the crosswalk is clear of pedestrians.

Check the official site if

  • You want the map of HAWK and traffic lights on the trail
  • You want to report a crossing signal that is not working
Northaven TrailOpen now, closes 11 pm

More about Northaven Trail

See the page
Northaven Trail Paved trail · 7982 Northaven Rd, Dallas, TX 75230 northaventrail.orgUpdated