The Makerspace on the Downtown Library's second floor.
Written by OnMap.meAbout George W. Hawkes Downtown LibraryUnofficialPublished 2 min read
Short answer
The Makerspace on the second floor has 3D printers, a milling machine, a vinyl cutter and embroidery machines in the Tinker Room, and sewing machines and sergers in the Innovate Room. It is closed on Monday. You need an eligible library card, a photo ID and a signed Maker Waiver Form.
In detail
What is in the Makerspace at the George W. Hawkes Downtown Library and what a first visit takes.
Know its hours.
The Makerspace keeps its own hours: Sunday 2 pm to 6 pm, Monday closed, Tuesday and Thursday noon to 8 pm, Wednesday noon to 6 pm, Friday and Saturday 10 am to 6 pm.
The Tinker Room.
The tech room holds 3D printers, a Carvey milling machine, a vinyl cutter and embroidery machines. The equipment list also names a Cricut Maker and a heat press.
The Innovate Room.
The textile room has sewing machines and sergers. A quilting machine is also on the equipment list.
Check your card.
Makers need a valid Arlington Public Library card or a resident Mansfield or Kennedale Public Library card. A Mansfield or Kennedale non-resident card and a TexShare card do not qualify.
Your first visit.
Before using any equipment for the first time, complete a Maker Waiver Form and show a valid library card and a photo ID. Check in with Makerspace staff every visit.
Monthly classes.
The Makerspace runs classes every month for ages 13 and up, open to anyone whether or not they hold a card. Materials are provided unless stated, and most classes need no registration.
Tip. Wear closed-toed shoes. Earplugs, safety glasses and gloves are available from Makerspace staff.
Call the library if
- You are not sure whether your library card type lets you use the Makerspace
- You want to know whether a class needs registration
- A machine you need is out of order

